Application Paper and Film

Our range of Application papers are used for transferring pre cut self adhesive PVC letters and logos onto the sign surface. Available with a variety of different adhesive tacks to suit your sign requirements. Medium tack is the most commonly used product. High Tack App paper would be used for finer lettering whereas Low tack App paper would be used for very large graphics. Standard roll size is 1220mm x 91.4mt however a slitting service is available for alternative widths.


Products

R-Tape Low Tack Application Paper

R-Tape premium quality standard weight paper with low tack natural latex adhesive for clean pick up and transfer of large lettering and graphics. Sticks and lays flat to the exposed release liner around cut vinyl graphics to protect against wrinkling, tunnelling and edge curling. Low Tack Application Paper is best suited to large signage projects where speed is a prerequisite. Standard roll size 1220mm x 91.4m, can be slit to narrower widths by request.

R-Tape Medium Tack Application Paper

R-Tape premium quality standard weight paper with medium tack natural latex adhesive for clean pick up and transfer of lettering and graphics. Sticks and lays flat to the exposed release liner around cut vinyl graphics to protect against wrinkling, tunneling and edge curling. Medium Tack Application Paper is user friendly and suitable for most signage projects including wet method applications. Standard roll size 1220mm x 91m and 610mm x 91m.

R-Tape High Tack Application Paper

R-Tape premium quality standard weight paper with high tack natural latex adhesive for clean pick up and transfer of very small hard-to lift lettering and graphics. Sticks and lays flat to the exposed release liner around cut vinyl graphics to protect against wrinkling, tunnelling and edge curling. High Tack Application Paper is best suited to small die cut lettering or difficult to lift signage projects. Standard roll size 1220mm x 91.4m, can be slit to narrower widths by request.

R-Tape Clear Choice AT60 Application Film

R-Tape AT60 Premium Clear Choice Application Film is a polypropylene film with natural rubber adhesive. AT60 Clear Choice is the ideal application film for multi-layer coloured vinyl applications as it provides complete see through clarity. Abrasion resistant and very conformable to irregular surfaces. Heavier film allows for easier handling. Adheres and stays flat to the exposed release liner around cut vinyl graphics to protect against wrinkling, tunnelling and edge curling. Available in standard roll size 1220mm x 91.4m or can be slit to narrower widths by request.

Products & Solutions